Front · to scale9 parts
Wardrobe
900 × 2100 × 600 mm
Floor-to-ceiling fitted storage
Doors, shelves, a hanging rail or drawers, on a 100 mm plinth. Every panel is sized from the outside measurements.
DoorsShelvesRailDrawers
9 Unit Types · Built for Carpenters
Every unit. Every cut. Calculated.
Nine parametric units for real fitted jobs — from media walls and bedrooms to alcove shelving, bedside tables, storage under a sloping roof and shaker doors. Dial in widths, internals and edging once; CabinetOS keeps every downstream number in sync.
0
unit types
0+
panels
0%
waste on our demo job
0
minutes to cutlist
CabinetOS handles the maths so you can focus on the build. Pick a unit, enter your dimensions, and get a precise cutlist, optimised sheet layout and client-ready PDF — every time.
All unit types
Nine units, drawn to scale.
Each unit at a real size: the front as the app draws it, the overall sizes, and how many parts go on the cut list.
Front · to scale10 parts
TV unit
1200 × 500 × 450 mm
Low media cabinet
Two doors with a shelf behind them, on a 100 mm plinth, and a worktop on top that runs 20 mm past each side. Or leave the front open.
DoorsWorktopShelfOpen
Front · to scale25 parts
Chest of drawers
800 × 900 × 450 mm
Freestanding drawer stack
Choose how many drawers. Fronts, drawer boxes and their bottoms are sized for side or undermount runners, under a worktop that runs 20 mm past each side.
DrawersWorktopRunnersPlinth
Front · to scale8 parts
Wall unit
800 × 720 × 350 mm
Hangs on the wall
No plinth: doors and shelves in a box that hangs above a floor unit or at a height you set.
DoorsShelvesWall-hung
Front · to scale20 parts
Combined unit
900 × 2400 × 600 mm
A main box with a top box above
A 1900 mm main box with two doors, a 300 mm top box with two small doors, and a 100 mm top filler up to the ceiling.
Two boxesDoorsTop doorsTop filler
Front · to scale10 parts
Angled unit
600 × 2100 × 600 mm
Fits under a sloped ceiling
Enter the low side and the flat part of the top. The slope panel, its cut angles, the back and the door are worked out.
SlopeCut anglesDoorRail
Front · to scale13 parts
Alcove unit
900 × 2400 × 380 mm
Cupboard below, shelves above
Made for the recess beside a chimney breast: inset doors on the cupboard, open shelves up to the ceiling.
Inset doorsShelvesFloor to ceiling
Front · to scale14 parts
Night stand
500 × 500 × 500 mm
Bedside table
A drawer and a door under a worktop that runs 20 mm past each side and past the fronts. One to three drawers, or an open shelf instead of the door.
WorktopDrawerDoorShelf
Front · to scale5 parts
Shaker door
500 × 720 mm, 18 mm frame
Frame-and-panel door
Stiles, rails and a panel in a groove. The tenons and the panel size are worked out, with up to three mid rails.
StilesRailsPanelMid rails
NewTry it
Configure a unit.
See it update live.
Pick any of the nine units, change the options and watch the drawing follow, to scale. The sizes and the part count come from the same rules and cut list as the app.
Live · to scale
10parts
900 × 2100 × 600 mm
Wardrobe
Floor-to-ceiling fitted storage
Width, mm
Front
Shelves
2
On the cut list
10parts
900 × 2100 × 600 mm
- 2 doors
- 1997 × 446
Pick a unit. Get the paperwork.
Behind each card is real geometry and hardware logic — mirrored in CSV, PDF and labelled board nests you can hand straight to your saw desk or outsource partner.
Real app output
Cutlist · 54 parts
Exported from live project state — qty, grain and edging travel with each row.
Total parts
54
Boards needed
11
Efficiency
82.4%
Edge banding
38.5m
| Unit | Code | Part | Mat. | L | W | T | Qty | Edge |
|---|---|---|---|---|---|---|---|---|
| Unit 1 | 1A | Top panel | MDF | 600 | 600 | 18 | 1 | L1 |
| Unit 1 | 1B | Bottom panel | MDF | 600 | 600 | 18 | 1 | L1 |
| Unit 1 | 1C | Side panel (Left) | MDF | 1950 | 600 | 18 | 1 | L1 |
| Unit 1 | 1D | Side panel (Right) | MDF | 1950 | 600 | 18 | 1 | L1 |
| Unit 1 | 1E | Base plinth panel | MDF | 600 | 100 | 18 | 1 | — |
| Unit 1 | 1F | Back panel | MDF | 564 | 1964 | 18 | 1 | — |
| Unit 1 | 1G | Shelf | MDF | 560 | 580 | 18 | 3 | L1 |
| Unit 1 | 1H | Door front | MDF | 1997 | 596 | 18 | 1 | L1L2W1W2 |
Showing 8 of 54 parts across 3 units
+ 46 moreOptimised Layout · Sheet 1 of 11
2440 × 1220mm · 7% waste · Kerf 2.8mm · Trim 3mm
Sheet size · 2440×1220Waste · 7%Strategy · Best yieldGrain · Portrait
| Code | Part | Dimensions | T | Rotated |
|---|---|---|---|---|
| 3I | Back panel | 1914 × 564 | 18 | Yes |
| 1I | Back panel | 1914 × 564 | 18 | Yes |
| 2A | Top panel | 500 × 600 | 18 | No |
| 2B | Bottom panel | 500 × 600 | 18 | No |
RotatedStandard
Extra features
Your cut list, your call.
The units do the maths, but the cut list is yours to change: add what the units don't make, hide what you don't need, or skip the units altogether.
Wardrobe900 × 2100 × 600
- Side panel1964 × 600×2
- Shelf860 × 580×2
- Scribe fillerExtra2100 × 60×1
- Door front1997 × 446×2
Add a part to any unit
A scribe filler, a spare shelf, a plinth return: add it inside the unit it belongs to, with its own size, material, edging and quantity. It's optimised, printed and exported with the rest of that unit.
Wardrobe900 × 2100 × 600
- Top panel900 × 600×1
- Back panel864 × 1964×1
- Shelf860 × 580×2
- Door front1997 × 446×2
1 part hidden · not in optimise, print or export
Hide a part you don't need
Back panel coming from hardboard you've already got? Tap the eye to hide it. It stays in the list, greyed out, but it's left out of the sheet optimiser, the print and the exports. Tap again to bring it back.
Manual cut listno units
- Shelf800 × 280×4
- Side720 × 300×2
- Top836 × 300×1
Add part
Just parts, no unit
Only need a few shelves or panels? Start a manual cut list: type in the parts and optimise them onto sheets, without building a unit first.
Stop measuring twice. Start building faster.
Spin up a wardrobe, tweak carcass internals, preview the nest — keep every sheet aligned with what you'll actually cut tomorrow.